MPT Full Synthetic POE/PAO Product Line
Mobil 1 Product Line
Brad Penn Product Line
Royal Purple Product Line
Red Line Product Lines
SynMax Product Line
Valvoline Product Line
- Valvoline SynPower Oils
- Valvoline MaxLife High Mileage Oils
Spectro Motorcycle Oil Product Line
Amsoil Products
- Amsoil Store
Royal Purple Extended Life Oil Filter Line
- Royal Purple Oil Filters
Wix Oil Filter Line
- Wix Oil Filters
Canton CM Oil Filters
- CM Billet Aluminum Spin-On Oil Filters
Boss Products
- Magnaflilter
Oil Change Accessories
- Oil Change Accessories
Sales & Specials
- Sales & Special

USA Synthetic Oils - Oil Change Accessories

OIL CHANGE PUMPS/EXTRACTORS

USA Synthetic Oils has added an oil change Shoppe to our product lines. We selected three oil change pumps to give our customer an excellent selection from which to chose. All of the pumps offered have a capacity of ten quarts or more. It is not “fun” to stop in the middle of an oil change, empty the pump into a container, and then start the pumping process for a second time. Additionally, that can be a pretty messy process! Moreover, the three pumps that we selected have small “footprints” and are top quality products, not toys.

MOTIVE PRODUCTS OIL EXTRACTOR PN #1708

Motive Products power extractors are designed to remove up to 10 quarts of engine oil, transmission fluid, brake fluid, power steering fluid or other vehicle fluids quickly and easily. Simply use the built-in hand pump and pressure gauge to create a vacuum in the tank, and the fluids are pulled into the Power Extractor through the 3 ft. of attached tubing. Motive Products power extractors come with a dipstick tube for oil changing and stretchable tubing for vacuum brake bleeding.

POWER EXTRACTOR FEATURES:

Large 10 quart high-density polyurethane tank (resistant to all chemicals)

Durable, chemical resistant polyurethane tubing

Integrated dual vacuum / pressure gauge

Flexible attachment for brake bleeding

Firm polyethylene attachment for changing engine oil

Integrated carrying handle

JABSCO 12-VOLT ELECTRIC FLAT TANK OIL CHANGER SYSTEM PN #17860-0012

With this pump, there is no need to worry about top heavy packaging or spills from openings on the container. The 3.5 gallon self-contained unit has a self-priming diaphragm pump with an easy pour spout for emptying. This new “small footprint” design allows the unit to be stowed easily in dock boxes, boat storage lockers or RV storage compartments. The unit comes with a dipstick suction tube, battery clamp leads and an on-off switch to make the pumping process simpler and easier.
JABSCO 12-VOLT ELECTRIC FLAT TANK OIL CHANGER FEATURES:

3.5 Gallon/14 Quart Self-Contained Jabsco Flat Tank Oil Changer System is Perfect for Boat, RV, Automobile, or Industrial

Powerful 12V DC motor makes oil changing quick and simple

Stows easily

Compact design

Easy pour spout

East-to-carry handle

Self-priming, run-dry pump

Convenient dipstick suction tube

7-foot electrical wire for easy usage

Battery clamp leads and an on-off switch to make the pumping process simpler and easier

SIMPLE STEPS FOR JABSCO OIL CHANGE:

Start engine and run for 5 minutes to heat the oil

Remove the dipstick and insert the suction probe

Attach the power cord clips to the engine's battery - RED = POSITIVE BLACK = NEGATIVE

Activate pump with switch on motor to drain crankcase

SHURFLO Oil Change System

has advanced motor technology that includes thermal overload protection, these pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer.

The ShurFlo Oil Change System makes a messy job clean and easy. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips and flip the switch. Oil is safely removed and stored in the easy-to-carry container. Oil should be heated to 140 Deg. F. for maximum pump efficiency. Incorporating SHURflo’s advance motor technology that includes thermal overload protection, these pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, Oil changing and liquid transfer.

SHURFLO OIL CHANGE SYSTEM FEATURES:

Oil Change/Winterizing System (12 VDC) 1.5 GPM [5.6 LPM]

REVERSIBLE SWITCH can extract fluids and pump-in fluids (Great Advantage

12 Volt Oil Change System

Complete with necessary tubing and oil storage container

Eight foot cable with battery alligator clips

Thermal overload protection

BUNA-N impeller

1.4 GPM Open Flow

3 Chamber Diaphragm

Ports: 3/8” NPT-Female

Liquid: 130 ?F [54 ?C] Max

Run Dry Performance

Stainless Steel Hardware

Polypropylene Housing

Categories

Products

Motive Oil Change Pump #1708 - 1 pump ON SALE!

MOTIVE PRODUCTS 1708 OIL EXTRACTOR Motive Products power extractors are designed to remove up to 10 quarts of engine oil, transmission fluid, brake fluid, power steering fluid or other vehicle fluids quickly and easily. Simply use the built-in hand pump and pressure gauge to create a vacuum in the tank, and the fluids are pulled into the Power Extractor through the 3 ft. of attached tubing. Motive Products power extractors come with a dipstick tube for oil changing and stretchable tubing for vacuum brake bleeding.

POWER EXTRACTOR FEATURES:

Large 10 quart high-density polyurethane tank (resistant to all chemicals)

Durable, chemical resistant polyurethane tubing

Integrated dual vacuum / pressure gauge

Flexible attachment for brake bleeding

Firm polyethylene attachment for changing engine oil

Integrated carrying handle

$64.99 $59.79 On Sale!

Jabso Oil Change Pump #17860-0012 - 1 pump

JABSCO 12-VOLT ELECTRIC FLAT TANK OIL CHANGER SYSTEM PN 17860-0012 With this pump, there is no need to worry about top heavy packaging or spills from openings on the container. The 3.5 gallon self-contained unit has a self-priming diaphragm pump with an easy pour spout for emptying. This new “small footprint” design allows the unit to be stowed easily in dock boxes, boat storage lockers or RV storage compartments. The unit comes with a dipstick suction tube, battery clamp leads and an on-off switch to make the pumping process simpler and easier.
JABSCO 12-VOLT ELECTRIC FLAT TANK OIL CHANGER FEATURES:

3.5 Gallon/14 Quart Self-Contained Jabsco Flat Tank Oil Changer System is Perfect for Boat, RV, Automobile, or Industrial

Powerful 12V DC motor makes oil changing quick and simple

Stows easily

Compact design

Easy pour spout

East-to-carry handle

Self-priming, run-dry pump

Convenient dipstick suction tube

7-foot electrical wire for easy usage

Battery clamp leads and an on-off switch to make the pumping process simpler and easier

SIMPLE STEPS FOR JABSCO OIL CHANGE:

Start engine and run for 5 minutes to heat the oil

Remove the dipstick and insert the suction probe

Attach the power cord clips to the engine's battery - RED = POSITIVE BLACK = NEGATIVE

Activate pump with switch on motor to drain crankcase

$126.99

Shurflow Oil Chance Pump #8050-305-426 - 1 pump

SHURflo Oil Change System has advanced motor technology that includes thermal overload protection, these pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer.

The ShurFlo Oil Change System akes a messy job clean and easy. Simply install the oil probe in the engine oil dipstick tube, attach the battery clips and flip the switch. Oil is safely removed and stored in the easy-to-carry container. Oil should be heated to 140 Deg. F. for maximum pump efficiency. Incorporating SHURflo’s advance motor technology that includes thermal overload protection, these pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, Oil changing and liquid transfer.

SHURFLO OIL CHANGE SYSTEM FEATURES:

Oil Change/Winterizing System (12 VDC) 1.5 GPM [5.6 LPM]

REVERSIBLE SWITCH can extract fluids and pump-in fluids (Great Advantage

12 Volt Oil Change System

Complete with necessary tubing and oil storage container

Eight foot cable with battery alligator clips

Thermal overload protection

BUNA-N impeller

1.4 GPM Open Flow

3 Chamber Diaphragm

Ports: 3/8” NPT-Female

Liquid: 130 ̊F [54 ̊C] Max

Run Dry Performance

Stainless Steel Hardware

Polypropylene Housing

$149.99

Pittsburgh 3-Claw Oil Filter Wrench w/Plastic Tips - 1 wrench

NOW TAKE A QUICK LOOK AT OUR FIVE OIL FILTER WRENCHES.

If you are a “do-it-your-selfer”, then you know that “oil filters go on easy, and come off hard”. You put a small amount of oil on the filter gasket, hand tighten 3/4 to 1 turn and its on. A few months and several thousand miles later, the “darn thing” will not come off; or at least, by hand!

The first oil filter wrench is the Pittsburgh 3-Claw Oil Filter Wrench is aimed at all oil filter buyers; but on this website, especially those that have purchased the Canton CM Spin-on Filters. If you need to remove the attractive blue anodized housings, you would not want to scratch the filter. This Pittsburgh 3-Claw Oil Filter Wrench, unlike its competition, has red plastic tips. These red tips prevent scratching of the filter housing and provide unparalleled grip as well. The Pittsburgh Oil Filter Wrench is virtually a “universal” fit wrench. You can use it on almost all filters. You can use on spin-on oil filters from 2-1/2" to 3-7/8" in diameter. Overall dimensions of the wrench: Closed- 2-1/2" diameter x 1-5/8" H, Open- 4" diameter x 1-5/8" H.

The red plastic covered jaws grip the filter tighter as you apply pressure using a 3/8" ratchet,

Heat-treated carbon steel with a durable black oxide finish

Compact, low profile design allows gripping in tight areas of confinement

Ends frustration of changing impossible-to-reach filters--with just ONE tool

Unique, patented ratcheting 3-jaw, 2-way mechanism AUTOMATICALLY grabs filters 2-1/2 to 4"

Use with any 3/8" drive ratchet or breaker bar

Straight-on, low-profile application means it fits regardless of clearance or angle

Universal size-range fits cars and trucks, imports and domestics. No more skinned knuckles

$14.99

Lisle Oil Filter Wrench # 63250 - 1 wrench

This is the Large Lisle Oil Filter Wrench #63250. This oil filter wrench removes all oil filters from 3-1/8" to 3-7/8" in Diameter. This extra large range enables the 63250 wrench to fit most all import and domestic car filters including the common 3" domestic car filters. Steel jaws grip filter without slipping. Works in tight spots from the front of the filter using 3/8" drive. Of our three oil filter wrenches, this is probably the most versatile given the large size range, although the plastic tips on the Pittsburgh grip well and do not scratch.

$12.99

Oil Filter Wrench - Economy Model - 1 wrench

This is our fourth Oil Filter Wrench offered in our website. This is our economy model. It is made of Drop Forged, Heat Treated, and Hardened and Tampered Steel. This oil filter wrench removes oil filters from 2-1/2" To 4" (63 - 102 mm ). While rather inexpensive, it is a good oil filter wrench and its filter size range is very versatile. The downside of this type of oil filter wrench is that the relatively long handle limits its use in tight spots. If your vehicle’s oil filter placement provides good space, this is a really good bargain.

$8.99

Mountain Oil Filter Wrench #8057 - 1 wrench

We saved the best for last. This is the Mountain 8057 Oil Filter Wrench. This Wrench will remove oil filters in size from 2-1/2 in. to 4-5/16 in. DIAMETER. It can be operated with a 3/8" socket wrench/driver or a 3/4" wrench. The Mountain 8057 is so strong that it can be used with an impact wrench. All of the oil filter wrenches in this website are tough, with excellent size ranges and compact for working in tight places. In simple words, THIS OIL FILTER WRENCH IS FOR THOSE WHO MUST HAVE THE BEST!!

$25.99